{"title":"LokSound By ESU","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe company makes an extensive line of DCC decoders, DCC sound decoders and accessories as well as digital control devices and modules for HO, N and Large Scales. The North American division is managed by Matthew Herman and located in Montoursville, Pennsylvania.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"thin-cable-5mm-10m-wht","title":"Super Thin Wire -- .5mm, 36AWG, 10m Roll, White","description":"The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30'  10m roll and is matched to common DCC colors.","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007045689709,"sku":"397-51940","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51940_01_d5cd7897-dcb0-4707-aa48-53f6fe2ca493.jpg?v=1774375090"},{"product_id":"lokpilot-micro-dcc-8-pin","title":"LokPilot 5 Fx Micro DCC Function-Only Decoder -- NEM652 8-Pin Interface","description":"The LokPilot 5 Fx Micro DCC-MM-SX-M4 and its twin LokPilot 5 Fx Micro DCC is an extremely small function-only decoder with a footprint of only 5\/16 x 9\/32\"  8.0 x 7.0mm and a thickness of only 3\/32\"  2.4mm (on the capacitor: 1\/8\"  2.9mm). It is used to control lighting effects and other non-motor functions. \u003cbr\u003e \u003cbr\u003e  The LokPilot 5 Fx DCC speaks the DCC protocol, but can also do it automatically with RailComPlus command stations. The LokPilot 5 Fx micro decoder recognizes the Marklin braking distances as well as the Zimo HLU - Zack Commands or the Lenz ABC system. Also braking with DCC brake modules or with DC voltage is possible. It also stops with a Selectrix brake diode. An ABC automatic shuttle train enables automatic commuting between two train stations. This is also with a function decoder is important in order to be able to synchronize control cars and motor vehicles. The LokPilot 5 Fx decoder can be used on analog DC railways. The decoder switches between the operating modes fully automatically. \u003cbr\u003e \u003cbr\u003e  The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC is equipped with six amplified function outputs with 180mA output current each and two logic level outputs for servos or Susi. The brightness of each output can be adjusted separately. A PowerPack can be connected to this decoder for bridging momentary power interruptions.  \u003cbr\u003e \u003cbr\u003e  LokPilot 5 Fx Micro is part of the line of \u003ca href=\"http:\/\/bit.ly\/397decoderall\" title=\"LokSound by ESU 397 decoder\"\u003eESU LokSound decoders.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007064662381,"sku":"397-59120","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-59120_01_aacc66c8-c0de-4b57-aeee-467bb9f57212.jpg?v=1774375096"},{"product_id":"loksnd-5-blank-dcdr-x22","title":"LokSound 5 DCC-MM-SX-M4 Multi-Prototcol Sound and Control Decoder -- 1.5A, PluX22, 11x15mm Speaker and Enclosure, Blank Sound Files","description":"LokSound 5 Sound and DCC Control Decoder by ESU is a great choice for HO, S and O Scale locomotive models. LokSound 5 is a true multi-protocol decoder. It supports DCC as well as Motorola, Selectrix and M4 systems. It offers a choice of 14 through to 128 speed steps, two and four-digit addresses in DCC format and up to 32 functions. On RailComPlus(R) systems the decoders register themselves automatically on command stations equipped with the feature. Despite its compact dimensions of only 1-3\/16 x 5\/8\"  30 x 15.5mm it is equipped with a dual speaker output and is supplied with an 11 x 15mm sugar cube speaker and enclosure.   Like all products of the LokSound family the LokSound 5 is a true multi protocol decoder. It supports DCC as well as Motorola, Selectrix and M4. Of course it supports 14 through to 128 speed steps as well as 2 and 4 digit addresses in DCC format and up to 32 functions. Thanks to RailComPlus the decoders register themselves fully automatically on suitable command stations. \u003cbr\u003e \u003cbr\u003e  This decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. \u003cbr\u003e \u003cbr\u003e  Motorola users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Central Unit 6021. \u003cbr\u003e \u003cbr\u003e  The M4 protocol supports the automatic registration on mfx compatible central units. \u003cbr\u003e \u003cbr\u003e  The LokSound 5 decoder supports the Mrklin braking sections just as well as the ZIMO HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokSound will come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations.   The LokSound 5 decoder can be used on analogue DC and AC layouts.   The LokSound 5 decoder can reproduce up to 10 channels simultaneously. Each channel offers up to 16 Bit - 31250 kHz and thus we have finally achieved hi-fi sound quality on your layout. For all practical purposes one cannot detect any difference to the original. A class D audio power amplifier with up to 3W output power feeds the speakers with a permitted impedance of 4 - 32 Ohms. The huge 128 MBit sound memory assures sufficient storage capacity. \u003cbr\u003e \u003cbr\u003e  The volume of all individual sound fragments may be adjusted separately. The outstandingly flexible sound engine without a rigid flow chart facilitates a prototypical simulation of all conceivable rail vehicles. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control of your vehicles. \u003cbr\u003e \u003cbr\u003e  You want your locomotives to be as realistic as possible. Therefore we have packed many function outputs into it. Subject to the type of interface every LokSound 5 has at least 10 amplified outputs. The decoders with PluX22 or 21MTC interface have an additional 4 outputs for controlling servos or as logic outputs. Of course, all important lighting functions are supported. The brightness of each output may be adjusted separately. The decoder supports the automatic push and pull movements - known as the coupler waltz - required for reliable operation of digital couplers such as the ones by ROCO and Krois as well as Telex couplers. \u003cbr\u003e \u003cbr\u003e  Motor control of the LokSound 5 has been further improved. A variable PWM pulse frequency ranging from 10 kHz to 50 kHz assures perfect silent operation, particularly for coreless motors. Thus the typical hum is a thing of the past. Load control can now be adjusted with up to 10 separate CVs and thus will manage even the most difficult cases. The unique Auto Tune function facilitates the automatic calibration of the decoder to perfectly match the motor. The LokSound 5 decoder supplies up to 1.5A motor current, which is quite sufficient even for older motor types. No sound files are pre-loaded - they are available for download per manufacturer instructions in the package. LokSound 5 is part of the line of \u003ca href=\"http:\/\/tinyurl.com\/397decoderall\" title=\"LokSound by ESU 397 decoder\"\u003eESU LokSound decoders.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007111225709,"sku":"397-58412","price":134.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-58412_01_9e13664d-e9cc-43cb-8a8a-e17b135ed4e1.jpg?v=1774375094"},{"product_id":"lokplt-mm-sx-m4-6-pin-dir","title":"LokPilot 5 Micro DCC-MM-SX-M4 Multi-Protocol Control-Only Decoder -- Direct 6-Pin Interface","description":"LokPilot 5 Micro DCC-MM-SX-M4 Multi-Protocol Control-Only Decoder by ESU is a great choice for N and TT Scale locomotive models. LokPilot 5 is a true multi-protocol decoder. It supports DCC as well as Motorola, Selectrix and M4 systems. It offers a choice of 14 through to 128 speed steps, two and four-digit addresses in DCC format and up to 32 functions. On RailComPlus(R) systems the decoders register themselves automatically on command stations equipped with the feature. This decoder is dual-mode and can operate on standard DC railroads. The LokPilot 5 Micro DCC-MM-SX-M4 has a footprint of only 5\/16 x 9\/32\"  8.0 x 7.0mm and a thickness of only 3\/32\"  2.4mm (on the capacitor:1\/8\"  2.9mm). PluX16 and Next18 interface versions are slightly larger at 1\/2 x 3\/8\"  13 x 9.2mm. \u003cbr\u003e \u003cbr\u003e  This decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. \u003cbr\u003e \u003cbr\u003e  Motorola users benefit from up to 28 speed steps for 255 addresses. Three additional Motorola addresses facilitate triggering of 16 functions. An integral programming mode even allows programming with the good old Marklin Control Unit 6021. The M4 protocol supports the automatic registration on mfx compatible central units. \u003cbr\u003e \u003cbr\u003e  The LokPilot Micro decoder supports the Marklin braking sections just as well as the Zimo HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokPilot will come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control. \u003cbr\u003e \u003cbr\u003e  The variants with 6-pin or 8-pin wiring harness offer 4 amplified function outputs with 180mA output current each as well as two logic level outputs for servos or Susi. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder supports automatic push and pull movements required for reliable operation of digital couplers. \u003cbr\u003e \u003cbr\u003e  Motor control of the LokPilot has a variable PWM pulse frequency ranging from 10 to 50kHz for perfectly silent operation, even with coreless motors. Load control can be adjusted with up to 10 separate CVs, and Auto Tune function facilitates automatic calibration of the decoder to match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to .75A) for the intended applications. A PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections. \u003cbr\u003e \u003cbr\u003e  LokPilot 5 Micro is part of the line of \u003ca href=\"http:\/\/bit.ly\/397decoderall\" title=\"LokSound by ESU 397 decoder\"\u003eESU LokSound decoders.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007119286637,"sku":"397-59817","price":40.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-59817_01_434bcbab-6bb3-4eba-b280-bbf24e17fb90.jpg?v=1774375097"},{"product_id":"interior-lght-pwr-pk-22f","title":"Interior Lght\/Pwr Pk\/.22F","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007191736685,"sku":"397-50710","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50710_01_9a9a0cd8-5288-4e9e-9244-a83c5069f89f.jpg?v=1774375089"},{"product_id":"cable-harness-6p-nem651","title":"DCC Decoder Cable Harness with NEM651 6-Pin Socket -- 11-13\/16\"  30cm Leads","description":"The LokSound by ESU DCC Decoder Cable Harnesses make DCC decoder installation easier in locomotives with no decoder socket. The harness comes with either a NEM652-NMRA 8-Pin or NEM651 6-Pin Socket. Use the harness for hardwiring the socket into your favorite locomotive and use the socket for plugging in your chosen decoder. The DCC Decoder Cable Harness includes 11-13\/16\"  30cm wire leads. These decoder harnesses are part of the broad assortment of \u003ca href=\"http:\/\/tinyurl.com\/397accessories\" title=\"LokSound by ESU 397 DCC accessories\"\u003eESU DCC accessories.\u003c\/a\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007197438317,"sku":"397-51951","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51951_01_1e82bbe9-8641-4cb3-834d-893047b6638b.jpg?v=1774375091"},{"product_id":"thin-cable-5mm-10m-brwn","title":"Super Thin Wire -- .5mm, 36AWG, 10m Roll, Brown","description":"The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30'  10m roll and is matched to common DCC colors.","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007211331949,"sku":"397-51948","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51948_01_519ba859-7fac-4175-a701-4eef972b7f67.jpg?v=1774375091"},{"product_id":"5-dcc-direct-dcdr","title":"LokSound 5 Direct Sound and DCC Control Decoder -- Board Replacement Decoder for Multiple Diesels - .67 x 2.72\"  17 x 69mm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007218540909,"sku":"397-58821","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-58821_01_971374b1-999b-4e8c-a64a-4004d94ca089.jpg?v=1774375095"},{"product_id":"ecosdetector-rc-feed-mod","title":"ECoSDetector RC Feedback Module -- 4 RailCom Detector Inputs for 2-Rail Use","description":"The LokSound by ESU ECoSDetector RC can monitor four blocks in a special way. RailCom(R) technology (local detector) shows if the block is occupied and can also indicate exactly which train is located there (using train number-address detection) when your locomotives are equipped with RailCom-capable decoders. \u003cbr\u003e \u003cbr\u003e  Knowing which train is located where leads to new functions in conjunction with the route setting feature of the ECoS: you may, for instance, activate grade crossings or route specific trains into certain tracks in your yards or depots. The detection inputs and sensors work electronically to assure reliable feedback even on dirty track. \u003cbr\u003e \u003cbr\u003e  Each ECoSDetector RC is directly wired to the command station via the EcoSlink bus. Besides the ECoS command station, all versions of the Marklin Central Station (when updated with ESU applications) are suitable. The command station automatically detects and registers all ECoSDetector modules. The devices are easily configured with the command station after installing the devices. The operating software (firmware) of each ECoSDetector can be updated and expanded whenever necessary and is accomplished through the command station. The ECoSDetector RC is part of the comprehensive \u003ca href=\"http:\/\/tinyurl.com\/397ecosall\" title=\"LokSound by ESU 397 ECoS system\"\u003eESU command control system.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007244558701,"sku":"397-50098","price":119.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50098_01_d2dbac01-372c-4424-a2df-54dd0936cab1.jpg?v=1774375088"},{"product_id":"thin-cable-5mm-10m-blk","title":"Super Thin Wire -- .5mm, 36AWG, 10m Roll, Black","description":"The LokSound by ESU Super Thin Wire is AWG 36, .5mm, 36AWG super flexible wire. It comes in a 30'  10m roll and is matched to common DCC colors.","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007274377581,"sku":"397-51942","price":5.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51942_01_717e3290-c339-43f4-9dd8-cf8133fcbee3.jpg?v=1774375090"},{"product_id":"lokpilot-5-basic-nem652","title":"LokPilot 5 Basic DCC Control Decoder -- NEM652 8-Pin Interface","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007295086957,"sku":"397-59020","price":29.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-59020_01_9db7736a-0b99-4bae-8540-4c6967599e68.jpg?v=1774375096"},{"product_id":"adptr-brd-f-loksnd-21mtc","title":"21MTC Adaptor Board -- Wired Interface Board for Locos without DCC Interface","description":"The LokSound by ESU 21MTC Adaptor Board is for adding a 21MTC interface by hard-wiring into a non-DCC ready locomotive. With its compact dimensions of 27mm x 17mm it is almost the same size as the decoder and is also equipped with an extra mounting lug that can be easily broken off if not required. \u003cbr\u003e \u003cbr\u003e  The board has 21 annular rings making clean wiring of your loco possible. Simply hard wire in the board and you can plug a decoder in when you're ready. This adapter board enables you to use all additional functions of the 21MTC connector (such as speaker outputs). \u003cbr\u003e \u003cbr\u003e  The 21MTC Adaptor Board is part of the broad assortment of \u003ca href=\"http:\/\/tinyurl.com\/397accessories\" title=\"LokSound by ESU 397 DCC accessories\"\u003eESU DCC accessories.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007312257389,"sku":"397-51967","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51967_01_e15d38f4-e438-4de6-aa95-955470fb2fc2.jpg?v=1774375092"},{"product_id":"speaker-22x42x8mm-sqr","title":"Rectangular Speaker with Enclosure -- 8 Ohm, 7\/8 x 1-21\/32 x 5\/16\"  22 x 42 x 8mm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007337390445,"sku":"397-50347","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50347_01_15db9e68-ecc1-4314-b201-22730637c27a.jpg?v=1774375088"},{"product_id":"adapter-board-plux22","title":"PluX22 Decoder Interface Adaptor Board -- For 9 Outputs with Soldering Pads \u0026 Wires 33 x 15.5mm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007390671213,"sku":"397-51958","price":15.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51958_01_b5361f17-e6aa-4163-b90f-b6320e2c573a.jpg?v=1774375092"},{"product_id":"lokpilot-5-8-pin-nem652","title":"LokPilot 5 DCC-Only Control-Only Decoder -- NEM652 8-Pin Interface","description":"LokPilot 5 DCC-Only Control-Only Decoder by ESU is a great choice for HO, S and O Scale locomotive models. LokPilot 5 supports DCC and will can NOT be used for analog AC systems. It offers a choice of 14 through to 128 speed steps, two and four-digit addresses in DCC format and up to 32 functions. On RailComPlus(R) systems the decoders register themselves automatically on command stations equipped with the feature. This decoder is dual-mode and can operate on standard DC railroads.   This decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. \u003cbr\u003e \u003cbr\u003e  The LokPilot decoder supports the Marklin braking sections just as well as the Zimo HLU braking commands or the Lenz ABC system. Braking with DCC brake generators or with DC is also possible. Furthermore the locomotive with a LokPilot will come to a halt when a Selectrix braking diode is switched into the circuit. The ABC push-pull feature enables the automatic commuting between two stations. Three separately adjustable braking functions and two alternative load scenarios provide you with maximum control. \u003cbr\u003e \u003cbr\u003e  Depending on the interface version, each LokPilot 5 decoder offers at least 10 amplified function outputs with 250mA output current each. In the versions with PluX22 or 21MTC interface, 4 outputs are added to control servos or logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder supports automatic push and pull movements required for reliable operation of digital couplers. \u003cbr\u003e \u003cbr\u003e  Motor control of the LokPilot has a variable PWM pulse frequency ranging from 10 to 50kHz for perfectly silent operation, even with coreless motors. Load control can be adjusted with up to 10 separate CVs, and Auto Tune function facilitates automatic calibration of the decoder to match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to 1.5 A) for the intended applications and a little extra for older motors. A PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections. \u003cbr\u003e \u003cbr\u003e  LokPilot 5 is part of the line of \u003ca href=\"http:\/\/bit.ly\/397decoderall\" title=\"LokSound by ESU 397 decoder\"\u003eESU LokSound decoders.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007404007789,"sku":"397-59620","price":36.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-59620_01_0a28026e-760e-4624-a74b-e7467746d05b.jpg?v=1774375097"},{"product_id":"i-o-extn-brd-v4-0-21mtc","title":"I\/O Expansion Board 21MTC","description":"The LokSound by ESU I\/O Expansion Board 21MTC is for expanding a LokPilot V4.0 or LokSound V4.0 decoder with a 21MTC interface. All you need to do is to plug the decoder onto the expansion board and benefit from using 4 additional function outputs (AUX5 through AUX8) for lighting effects, coupler etc. In addition, you are able to connect 2 RC-servos. The 5V voltage needed for servo control is provided by the board. The highlight of the expansion board is surly the control electronics for synchronized smoke units. You just need to install an ESU smoke unit (from Class 215) into your locomotive that allows to generate synchronised steam chuffs or diesel smoke. \u003cbr\u003e \u003cbr\u003e  With the help of the LokPilot or LokSound V4.0 decoder all functions can be controlled in a direct way and are fully integrated into function mapping. The board measures  0.61 x 1.18 x 0.22\"  15.5 x 30 x 5.5mm and is the exact size of a LokSound V4.0 decoder. The module can be directly plugged into a 21MTC interface of a loco (if enough height is available) or freely wired via its cable connections. The I\/O Expansion Board 21MTC is part of the broad assortment of \u003ca href=\"http:\/\/tinyurl.com\/397accessories\" title=\"LokSound by ESU 397 DCC accessories\"\u003eESU DCC accessories.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007411839341,"sku":"397-51970","price":53.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51970_01_415962da-fe99-4356-b3b7-e4ebaf5e25e9.jpg?v=1774375093"},{"product_id":"loksnd-5-dcc-pwr-pk-gnrc","title":"LokSound 5 DCC Direct Sound \u0026 Control Decoder with Integrated PowerPack -- Fits Various Models","description":"With its unique design LokSound 5 DCC Direct, with integrated PowerPack from ESU can easily replace boards that provide poor motor control, low volume, or generally inferior sound. The decoder works fine with most factory installed speakers as well as ESU 11x15mm sugar cube speaker and sound enclosure kits. This decoder also features  ESU PowerPack direct built into the decoder for operation over small dead spots in trackwork. \u003cbr\u003e \u003cbr\u003e  The LokSound 5 DCC is made for the North American and Australian markets. It is a pure DCC decoder, which supports RailComPlus and can also be used on DC layouts. With its size of 0.67 x 2.72\"  17 x 69mm the LokSound 5 DCC Direct, with integrated PowerPack will fit in almost all of the popular North American and Australian HO manufacturers locomotives. \u003cbr\u003e \u003cbr\u003e  In the DCC format, 14 to 128 speed steps are as natural as 2- and 4-digit addresses and up to 32 functions. Thanks to RailComPlus, the decoders log on fully automatically to a suitable digital central unit. \u003cbr\u003e \u003cbr\u003e  This LokSound Direct 5 Decoder is compatible with all DCC programming modes and CV values on the main track, and can be read out with suitable control panels. For panels that can only program the CVs from 1-255, there are auxiliary registers. Braking with DCC brake modules or DC voltage is also possible. An automatic ABC shuttle allows automatic commuting between two stations. \u003cbr\u003e \u003cbr\u003e  The LokSound 5 DCC Direct, with integrated PowerPack decoder can also be used on analog DC tracks. \u003cbr\u003e \u003cbr\u003e  Sound The LokSound 5 DCC Direct, with integrated PowerPack can play up to 10 channels simultaneously. Each channel can be resolved with up to 16-bit\/31250 kHz and offers hi-fi quality on your system. A Class D audio power amplifier with up to 3W output powers the speakers, which may have between 4 ohms and 32 ohms impedance. The huge 128 Mbit sound storage provides enough capacity. \u003cbr\u003e \u003cbr\u003e  All individual sounds can be individually adjusted in volume. The super flexible sound engine without rigid schedule allows the prototypical simulation of all imaginable locomotives. Three separately adjustable braking functions and two alternative load scenarios give you the maximum control over your Locos. \u003cbr\u003e \u003cbr\u003e  The LokSound 5 DCC Direct, with integrated PowerPack with function outputs offers up to 10 amplified function outputs depending on your interface. Many lighting effects are available and the brightness of each output can be set separately. \u003cbr\u003e \u003cbr\u003e  This LokSound 5 decoder is compatible with the thousands of LokSound Select and LokSound V4 decoders including the Full Throttle and Drive Hold features. \u003cbr\u003e \u003cbr\u003e  Motor Control The engine control of the LokSound 5 DCC Direct features a variably adjustable PWM clock frequency of 10kHz to 50kHz ensures especially in bell armature motors for a super quiet operation - The typical humming is a thing of the past. The load control can now be adapted to difficult cases with up to 10 CVs. The unique auto tune function allows the automatic decompression of the decoder to the motor. The LokSound 5 DCC Direct, with integrated PowerPack decoder delivers up to 1.5A motor current - enough juice for older engines. \u003cbr\u003e \u003cbr\u003e  The LokSound 5 DCC Direct, with integrated PowerPack reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With 1 Farad capacity the unit supplies power to all light and motor functions as well as to the sound module. Depending on the energy consumption of your model it may continue to move for up to three seconds. \u003cbr\u003e \u003cbr\u003e  The onboard PowerPack incorporates an integral charging circuit controlled by the decoder. Because of this there are no limitations or need to disconnect it during programming like some non-ESU \"keep-alive\" devices. In order to avoid an undue load on the booster in case there are several models in the same booster sector, the charging current is limited. \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007492874605,"sku":"397-58921","price":154.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-58921_01_3c72ce52-1519-4efc-9ad2-42a67fa544da.jpg?v=1774375095"},{"product_id":"adapter-brd-24-pin-e24","title":"Adapter Board -- Wired-to-E24 Interface for LokSound 5 Nano 19.6 x 8.5mm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007496511853,"sku":"397-53953","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-53953_01_82d32aa3-f78f-4e3c-b2a2-6ee4b557f7d1.jpg?v=1774375094"},{"product_id":"l-net-converter-to-ecos","title":"L.Net Loconet Converter - Integrator -- Allows Other Handheld Throttles to be used on ESU ECoS System","description":"The LokSound by ESU L.Net Converter - Integrator allows the use of handheld throttles from several manufacturers to be used with the popular ESU ECoS command station. The converter works with Loconet-compatible throttles from Digitrax, Daisy, Marklin, Profiboss, Fred or Daisy. The ESU L.Net Converter is part of the broad assortment of \u003ca href=\"http:\/\/bit.ly\/397accy\"\u003eESU DCC accessories.\u003c\/a\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007565554029,"sku":"397-50097","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50097_01_6ff3b305-6636-4171-a051-4bc58cbfce9b.jpg?v=1774375087"},{"product_id":"wire-harness-open-wires","title":"18-Pin Next18 Socket-to-Wire Leads Harness -- 3-7\/16\"  8.8cm Wire Leads, Includes Heat-Shrink Tubing","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007613198701,"sku":"397-51993","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-51993_01_4ccc0b42-d4ab-4945-941f-84c79e2e248e.jpg?v=1774375093"},{"product_id":"lokplt-micro-8-pin-nem652","title":"LokPilot 5 Micro DCC-Only Control-Only Decoder -- NEM652 8-Pin Interface","description":"LokPilot 5 Micro DCC-Only Control-Only Decoder by ESU is a great choice for N and TT Scale locomotive models. LokPilot 5 DCC-Only supports DCC and will NOT support operation on analog AC systems. It offers a choice of 14 through to 128 speed steps, two and four-digit addresses in DCC format and up to 32 functions. On RailComPlus(R) systems the decoders register themselves automatically on command stations equipped with the feature. This decoder is dual-mode and can operate on standard DC railroads. The LokPilot 5 Micro DCC-Only Control-Only Decoder has a footprint of only 5\/16 x 9\/32\"  8.0 x 7.0mm and a thickness of only 3\/32\"  2.4mm (on the capacitor:1\/8\"  2.9mm). PluX16 and Next18 interface versions are slightly larger at 1\/2 x 3\/8\"  13 x 9.2mm. \u003cbr\u003e \u003cbr\u003e  This decoder supports all DCC programming modes and thanks to RailCom you may read out the CV values on the main, provided you have a command station supporting RailCom. There are utility registers for command stations that only facilitate programming of CVs ranging from 1 to 255. \u003cbr\u003e \u003cbr\u003e  The variants with 6-pin or 8-pin wiring harness offer 4 amplified function outputs with 180mA output current each as well as two logic level outputs for servos or Susi. The versions with Next18 or PluX16 interface have a total of 6 amplified outputs and two logic level outputs. All important lighting functions are available. The brightness of each output can be set separately. The decoder supports automatic push and pull movements required for reliable operation of digital couplers. \u003cbr\u003e \u003cbr\u003e  Motor control of the LokPilot has a variable PWM pulse frequency ranging from 10 to 50kHz for perfectly silent operation, even with coreless motors. Load control can be adjusted with up to 10 separate CVs, and Auto Tune function facilitates automatic calibration of the decoder to match the motor. The LokSound 5 micro decoder supplies sufficient motor current (up to .75A) for the intended applications. A PowerPack can be connected to the LokPilot 5 to bridge dirty rail sections. \u003cbr\u003e \u003cbr\u003e  LokPilot 5 Micro is part of the line of \u003ca href=\"http:\/\/bit.ly\/397decoderall\" title=\"LokSound by ESU 397 decoder\"\u003eESU LokSound decoders.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53007800271213,"sku":"397-59820","price":37.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/no-image-available_552990be-ebd8-44ce-b414-e6dbc61b9956.svg?v=1775240500"},{"product_id":"premium-foam-train-service-tray-12-7-8-x-6-1-2-x-2-11-16-32-8-x-16-6-x-6-8cm","title":"Premium Foam Train Service Tray -- 12-7\/8 x 6-1\/2 x 2-11\/16\"  32.8 x 16.6 x 6.8cm","description":"The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: locomotives can be clamped upside down to comfortably reach the underbody of the locomotive. In the classic inclined tray, you can easily reach the sidewalls of the locomotive or set the locomotive up almost vertically to reach its interior. The tray is made of a soft, fine-pored foam with high restoring force which will return to its original shape. Small parts such as grab irons, antennas or pantographs won't get caught. The foam is resistant to oil, grease and other cleaning agents. A second recess runs the length of the foam for safe storage of small parts and screws while you're working and it has a magnet to hold ferrous screws and parts. The Foam Train Service Tray measures 12-7\/8 x 6-1\/2 x 2-11\/16\"  32.8 x 16.6 x 6.8cm; long enough for most six axle diesels and smaller steam engines. For longer equipment, simply place two or more foam trays side by side.","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175397450093,"sku":"397-41010","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-41010_01_7f99c0f8-1402-48b8-830d-212cf6938128.jpg?v=1774978976"},{"product_id":"docking-station-for-mobile-control-ii-pro-wall-fascia-desktop-mount-with-39-3-8-1m-usb-c-cable","title":"Docking Station for Mobile Control II\/Pro Wall (Fascia)\/Desktop Mount -- With 39-3\/8\"  1m USB-C Cable","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175398695277,"sku":"397-50005","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/no-image-available_0c6a08d4-ff50-4bfa-915c-7a53f0662b88.svg?v=1775241263"},{"product_id":"ecosboost-booster-fits-esu-ecos-and-marklin-central-station-command-stations","title":"ECoSBoost Booster -- Fits ESU ECoS and Marklin Central Station Command Stations","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175400071533,"sku":"397-50012","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50012_01_1d877f91-da30-4ac8-8db4-9f5f3ee61a57.jpg?v=1774978977"},{"product_id":"ecosdetector-feedback-module-16-digital-inputs-for-2-rail-or-3-rail-operation","title":"ECoSDetector Feedback Module -- 16 Digital Inputs For 2-Rail or 3-Rail Operation","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175401513325,"sku":"397-50094","price":249.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50094_01_e65e7dd2-e5bf-40cb-b05d-90b6272b3513.gif?v=1774978978"},{"product_id":"ecosdetector-output-extension-module-for-connection-of-32-bulbs-leds","title":"ECoSDetector Output Extension Module -- For Connection of 32 Bulbs\/LEDs","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175402135917,"sku":"397-50095","price":64.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50095_01_021c6894-cec1-4d52-b78d-613d7aab9ed1.gif?v=1774978978"},{"product_id":"ecosdetector-standard-feedback-module-for-marklin-3-rail-3-digit-operation-16-digital-inputs-opto","title":"ECoSDetector Standard Feedback Module for Marklin 3-Rail -- 3-Digit Operation, 16 Digital inputs, Opto","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175402824045,"sku":"397-50096","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/no-image-available_4b947bbf-6b7a-4cb6-b5fd-376eb824e6a0.svg?v=1775240865"},{"product_id":"ecoslink-terminal-bus-distribution-plate-6-slave-jacks-90cm-cable","title":"ECoSlink Terminal Bus Distribution Plate -- 6 Slave Jacks, 90cm Cable","description":"The LokSound by ESU ECoSlink Terminal is ideal for large layouts. If your train layout is growing and you need additional ECoSBoost boosters and ECoSDetector feedback modules to connect to your ECoS command station, and you are running out of connectors, you should buy the ECoSlink Terminal. \u003cbr\u003e \u003cbr\u003e  The ECoSlink Terminal will be connected to the ECoS or Central Station via the provided bus cable to the extend jack. It has two jacks on the front panel for hand controllers (e.g. mobile station) and four sockets on the back for devices mounted under the layout. These include mainly ECoSBoost booster and ECoSDetector feedback modules. \u003cbr\u003e \u003cbr\u003e  The ECoSlink Terminal can provide power to all attached devices either from the ECoS power supply, or for a block from an external power supply through one or more ECoSlinks - especially useful for systems with many hand controls, boosters and feedback modules. Multiple ECoSlink Terminals can be connected to each other with standard ethernet patch cables with RJ45 connectors. Each ECoSlink Terminal is typically mounted on the layout fascia with only the front panel visible. ECoSlink is for use with  ECoS and Central Station DCC base units.  \u003cbr\u003e \u003cbr\u003e  The ECoSlink Terminal is part of the comprehensive \u003ca href=\"http:\/\/tinyurl.com\/397ecosall\" title=\" LokSound by ESU 397 ECoS system\"\u003eESU command control system.\u003c\/a\u003e \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175403577709,"sku":"397-50099","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50099_01_dcfdfb17-5693-4077-9e78-ab499bf0e0fa.jpg?v=1774978979"},{"product_id":"mobile-control-pro-wireless-throttle-with-access-point-set-for-ecos-z21-cs3","title":"Mobile Control Pro Wireless Throttle -- With Access Point Set for ECoS\/Z21\/CS3","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175404888429,"sku":"397-50115","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50115_01_9f6a0653-e293-4ccd-96e6-8b9a6ca4e902.jpg?v=1774978979"},{"product_id":"mobile-control-pro-wireless-throttle-only","title":"Mobile Control Pro Wireless Throttle Only","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175405707629,"sku":"397-50116","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50116_01_331f915e-3e6c-49b7-96c3-e7ae8df39aee.jpg?v=1774978979"},{"product_id":"power-supply-output-15-21vdc-7a-150va-input-120-240vac-with-us-and-european-cables","title":"Power Supply -- Output: 15-21VDC 7A, 150VA, Input 120-240VAC with US and European Cables","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175406461293,"sku":"397-50119","price":92.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/no-image-available_e94a73d1-5d0b-4dad-adf8-c76bb2e3f944.svg?v=1775240872"},{"product_id":"ecos-command-station-2-1","title":"ECos Command Station 2.1","description":"Second generation ECoS command station combines the latest digital technology, and a wide range of easy-to-use functions, perfect for all skill levels. Can be used with all DCC systems, as well as Marklin(R) Motorola(R), Selectrix, and M4 protocols. Allows for easy operation of two trains, and stationary decoders to control select routes. can also be used to program decoders. Unit features a built-in booster, and large full-color TFT screen.","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175407149421,"sku":"397-50210","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50210_01_02e51d9a-6236-4fc3-aea7-63d70b6e65be.jpg?v=1774978979"},{"product_id":"ecos-command-station-includes-power-supply","title":"ECoS Command Station -- Includes Power Supply","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175409901933,"sku":"397-50220","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50220_01_f6c721f6-2650-4771-97df-26f32142ae49.jpg?v=1774978979"},{"product_id":"cabcontrol-wireless-dcc-control-system","title":"CabControl Wireless DCC Control System","description":"With the LokSound by ESU CabControl Wireless DCC Control System system you have wireless control of your locomotives, accessories and routes simply by Wi-Fi! With the CabControl Integrated Control Unit you have full control over your locomotives, turnouts and signals at the tap of a finger. The unit communicates with the Mobile Control II Wireless Controller via wireless LAN (local area network). The CabControl's integrated 7 Amp booster also allows it to power large layouts. LokSound decoders equipped with RailComPlus(R) register automatically with the system.  \u003cbr\u003e \u003cbr\u003e  CabControl - Integrated Control Unit Developed for use in North America and Australia, the system displays American and Australian locomotive icons (along with European Icons) on the handheld display. \u003cbr\u003e \u003cbr\u003e  Features include easy consisting for multiple unit lash-ups using drop down menus, all DCC modes (14, 28, 128 speed steps) and compatibility with long and short addresses. Over 16,000 locomotives can be arranged and controlled and the system allows access up to 28 functions per locomotive. Additionally, the system can control over 1000 magnetic accessories. All scales can be controlled with the CabControl system thanks to the variable-voltage 7 Amp power supply. \u003cbr\u003e \u003cbr\u003e  Built-in WLAN access point creates a unique WiFi-network for your Mobile Control II wireless throttles. The system supports at least 32 Mobile Control II wireless controllers are compliant with all relevant IEEE WLAN standards. The CabControl features a LAN port to connect the box to your home network. Via the home network, the CabControl can be connected to Model RailRoad Control Software. Suitable for use in America and Europe \u003cbr\u003e \u003cbr\u003e  The ECoSlink port allows easy connection with ESU boosters and CabControl supports ECoSlink, a high speed, CAN based bus system. The CabControl built-in booster has so much power that, in most cases, you won't need additional boosters. \u003cbr\u003e \u003cbr\u003e  Hook up is simple with the CabControl ystem. Plug the 7 Amp power supply into the CabControl box and then hook up your CabControl box to your track for track power and it's ready to go! The wireless CabControl throttles automatically connect to the system via WLAN. \u003cbr\u003e \u003cbr\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175411933549,"sku":"397-50310","price":499.9,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50310_01_15772959-a6ed-4143-b6d3-bfde3de124b8.jpg?v=1774978980"},{"product_id":"cell-phone-type-speaker-w-sound-chamber-8-ohm-0-5-watt-11mm-x-15mm","title":"Cell Phone Type Speaker w\/Sound Chamber -- 8 ohm, 0.5 watt, 11mm X 15mm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175412654445,"sku":"397-50321","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50321_01_6057f011-66fd-45c8-aef4-17b77e3e4306.jpg?v=1774978980"},{"product_id":"speaker-for-loksound-xl-v3-5-and-4-0-decoders-monacor-sp6-4sq-2-5-16-59mm-round-no-chamber-8-ohm-for-piko-and-lgb","title":"Speaker for LokSound XL V3.5 and 4.0 Decoders -- Monacor Sp6\/4SQ, 2-5\/16\"  59mm Round No Chamber, 8 Ohm for Piko and LGB","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175413342573,"sku":"397-50322","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50322_01_8babffd1-8e0f-4315-a51f-4bd993c4b2a2.jpg?v=1774978980"},{"product_id":"1-9-16-4cm-round-speaker-w-sound-chamber-8-ohm","title":"1-9\/16\"  4cm Round Speaker w\/Sound Chamber -- 8 Ohm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175414096237,"sku":"397-50323","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50323_01_b8d0aaea-05d1-4da7-a64a-ff1b550e03c4.jpg?v=1774978981"},{"product_id":"speaker-for-loksound-xl-v3-5-and-4-0-decoders-visaton-frs-7-2-3-4-70mm-round-no-chamber-8-ohm-for-g-scale","title":"Speaker for LokSound XL V3.5 and 4.0 Decoders -- Visaton FRS 7, 2-3\/4\"  70mm Round No Chamber, 8 Ohm for G Scale","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175414784365,"sku":"397-50324","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50324_01_46a5822a-7466-46e8-9e56-583b22448934.jpg?v=1774978981"},{"product_id":"speaker-4-ohm-9-16-x-1-2-14-x-12mm","title":"Speaker -- 4-Ohm, 9\/16 x 1\/2\"  14 x 12mm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175416127853,"sku":"397-50326","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50326_01_fd321fb1-c7d2-4c23-8cd6-38699f964685.jpg?v=1774978982"},{"product_id":"loudspeaker-16-x-25mm-square-4-ohms","title":"Loudspeaker -- 16 x 25mm, Square, 4 ohms","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175418683757,"sku":"397-50330","price":8.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50330_01_4147d4f8-5d08-4298-b763-29a4154229b2.gif?v=1774978982"},{"product_id":"loudspeaker-23mm-round-4-ohms","title":"Loudspeaker -- 23mm, Round, 4-Ohms","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175421141357,"sku":"397-50332","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/no-image-available_993df665-b825-4435-b481-ad7df971fe5d.svg?v=1775240894"},{"product_id":"loudspeaker-28mm-round-4-ohms","title":"Loudspeaker -- 28mm, Round, 4 ohms","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175422222701,"sku":"397-50333","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/no-image-available_e5107c19-b14c-4d9c-9bf6-d21aa843cc69.svg?v=1775240896"},{"product_id":"speaker-for-loksound-xl-v3-5-and-4-0-decoders-visaton-sc4-7nd-1-5-8-x-2-3-4-41-x-70mm-8-ohm","title":"Speaker for LokSound XL V3.5 and 4.0 Decoders -- Visaton SC4.7ND, 1-5\/8 x 2-3\/4\"  41 x 70mm, 8 Ohm","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175424713069,"sku":"397-50336","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50336_01_38f74134-22df-4685-aee1-c64221940f30.jpg?v=1774978982"},{"product_id":"speaker-for-loksound-xl-v3-5-and-4-0-decoders-visaton-frs5-1-31-32-50mm-round-no-chamber-8-ohm-for-o-g-scale","title":"Speaker for LokSound XL V3.5 and 4.0 Decoders -- Visaton FRS5, 1-31\/32\"  50mm Round No Chamber, 8 Ohm for O, G Scale","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175425991021,"sku":"397-50337","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50337_01_5b1772d0-6568-4533-89b1-e633f2e02598.jpg?v=1774978983"},{"product_id":"speaker-for-loksound-xl-v3-5-and-4-0-decoders-visaton-frs8-3-1-16-78mm-round-no-chamber-8-ohm-for-g-scale","title":"Speaker for LokSound XL V3.5 and 4.0 Decoders -- Visaton FRS8,  3-1\/16\"  78mm Round No Chamber, 8 Ohm for G Scale","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175427203437,"sku":"397-50338","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50338_01_f84d580f-5aaf-4b74-b907-bd5a00fd80c8.jpg?v=1774978983"},{"product_id":"modular-speaker-baffle-set-for-twin-sugar-cube-speakers-28mm-20x40mm-and-16x35mm-baffles-for-11-x-15mm-speakers","title":"Modular Speaker Baffle Set for Twin Sugar Cube Speakers -- 28mm; 20x40mm and 16x35mm baffles for 11 x 15mm Speakers","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175428645229,"sku":"397-50340","price":20.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50340_01_b35e6aa7-e9c5-4985-8e7d-d2ce60388421.jpg?v=1774978983"},{"product_id":"modular-speaker-baffle-set-with-1-single-sugar-cube-speaker-20mm-23mm-and-16x25mm-baffles-and-1-11-x-15mm-speaker","title":"Modular Speaker Baffle Set with 1 Single Sugar Cube Speaker -- 20mm; 23mm and 16x25mm baffles and 1 11 x 15mm Speaker","description":"","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175429300589,"sku":"397-50341","price":16.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50341_01_527afb68-4b49-4fa4-a86b-d2657f6d9a03.jpg?v=1774978984"},{"product_id":"rectangular-speaker-with-enclosure-8-ohm-1-2-watt-11-32-x-1-2-x-1-8-9-x-13-x-3mm","title":"Rectangular Speaker with Enclosure -- 8 Ohm, 1\/2 Watt, 11\/32 x 1\/2 x 1\/8\"  9 x 13 x 3mm","description":"The LokSound by ESU Rectangular Speaker with Enclosure is ideal for use in N, TT and small HO Scale model locomotives. This speaker includes a built-in enclosure to enhance its output and is rated at 8 Ohms and 5 Watts. At only 11\/32 x 1\/2 x 1\/8\"  9 x 13 x 3mm, this tiny speaker will easily fit inside widely used narrow-hood diesels such GPs, SDs, GE U-Boats or GEVO diesels as well as other locomotives. Check out the line of \u003ca href=\"http:\/\/bit.ly\/397speak\"\u003eESU speakers to fit your sound projects.\u003c\/a\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175430054253,"sku":"397-50342","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50342_01_f3169242-c485-4f41-a695-ab4efb95a24a.jpg?v=1774978984"},{"product_id":"rectangular-speaker-with-enclosure-8-ohm-1-1-8-x-2-21-32-x-9-16-29-x-68-x-14mm","title":"Rectangular Speaker with Enclosure -- 8 Ohm, 1-1\/8 x 2-21\/32 x 9\/16\"  29 x 68 x 14mm","description":"The LokSound by ESU Rectangular Speaker with Enclosure is ideal for use in G, I and O Scale model locomotives. This speaker includes a built-in enclosure to enhance its output and is rated at 8 Ohms. At 1-1\/8 x 2-21\/32 x 9\/16\"  29 x 68 x 14mm, this speaker will easily fit inside your favorite large-scale locomotives. Check out the line of \u003ca href=\"http:\/\/bit.ly\/397speak\"\u003eESU speakers to fit your sound projects.\u003c\/a\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175430709613,"sku":"397-50343","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50343_01_5bfcd1e4-4982-4771-8f07-2d8f345a1ada.jpg?v=1774978984"},{"product_id":"rectangular-speaker-with-enclosure-4-ohm-15-16-x-2-5-32-x-11-32-24-x-55-x-8-6mm","title":"Rectangular Speaker with Enclosure -- 4 Ohm, 15\/16 x 2-5\/32 x 11\/32\"  24 x 55 x 8.6mm","description":"The LokSound by ESU Rectangular Speaker with Enclosure is ideal for use in HO, OO, S and small O Scale model locomotives. This speaker includes a built-in enclosure to enhance its output and is rated at 8 Ohms. At 15\/16 x 2-5\/32 x 11\/32\"  24 x 55 x 8.6mm, this rectangular speaker will easily fit inside your favorite locomotives. Check out the line of \u003ca href=\"http:\/\/bit.ly\/397speak\"\u003eESU speakers to fit your sound projects.\u003c\/a\u003e","brand":"LokSound By ESU","offers":[{"title":"Default Title","offer_id":53175431397741,"sku":"397-50344","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/files\/397-50344_01_91ccc4d5-8585-4fbf-8e39-ef015f7e5c1b.jpg?v=1774978984"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0929\/7228\/6317\/collections\/Loksound.webp?v=1774993571","url":"https:\/\/walthers.com\/collections\/loksound-by-esu.oembed","provider":"Walthers","version":"1.0","type":"link"}